Every guide is free — start with the Start Here guide →
Plain-Language Knitting GuidesKnitBeginnersStart Learning

Double Pointed Knitting Needles (DPNs): Explainer and Short How-To

By the KnitBeginners team · Published 5 November 2026 · Updated 19 November 2026

Double pointed knitting needles — DPNs — are short needles pointed at both ends, sold in sets of four or five, used for knitting small tubes in the round: sock cuffs, hat crowns, sleeve cuffs, and glove fingers. Where a circular needle would be too long to go around a small circumference, DPNs go around it comfortably, because the stitches are divided across several short needles instead of one long cable.

This page is an explainer with a short how-to section, not a full tutorial. That scope is deliberate: the research shows DPNs as a real but narrow topic — one page that explains what they are and how to start with them, with the full step-by-step deferred until a dedicated technique page is justified. The how-to phrases below ("how to knit with double pointed needles," "dpns knitting") are sections on this page, not separate pages.

DPNS OR CIRCULAR NEEDLES?SituationUseUnder ~16 inches aroundDPNs — the standard tool.Over ~16 inches aroundCircular needles.Hat crown decreasingDPNs, as the crown shrinks.Learning in the roundEither — circulars are often easier to start with.Travel knittingDPNs: compact and light; circulars: compact, cable cantangle.
Infographic: double-pointed or circular needles — which to use, by situation.

What Double Pointed Needles Are

Hands working stitches in the round across four short wooden needles.

A standard knitting needle has one point and one stopper. A double-pointed needle has a point at both ends, so stitches can slide off either end — which is both the feature and the challenge. DPNs are shorter than straight needles, usually 5 to 8 inches long, and they come in sets: four needles (stitches on three, worked with the fourth) or five needles (stitches on four, worked with the fifth). Five-needle sets make a squarer arrangement that some knitters find more stable; four-needle sets make a triangle that others find simpler. Either works.

DPNs are used when the circumference being knitted is too small for even the shortest circular needle — roughly, anything under about 16 inches around. A hat crown as it decreases, a sock cuff, a sleeve cuff, and a glove finger are all classic DPN territory.

How to Knit with Double Pointed Needles: The Short How-To

Casting On

Cast on all stitches onto one DPN, using any cast-on method — the long-tail cast-on works fine. Then divide the stitches evenly across three (or four) needles by slipping them purlwise from the casting needle onto the other needles. Keep the stitch counts as even as possible; uneven division makes one needle carry more weight and gap more.

Joining in the Round

Arrange the needles in a triangle (four-needle set) or square (five-needle set), with the cast-on edge facing inward and no twist in the row — the same twist check as for circular knitting, and just as unfixable if missed. Place a stitch marker on the first needle to mark the start of the round, then knit the first stitch on the first needle using the empty needle. That empty needle becomes the working needle; when it empties the first needle, it becomes the next working needle, and so on around.

Working Around

Work around the triangle or square, one needle at a time, always using the empty needle to work the next full needle. The rhythm is: work a needle empty, pick up the next needle's stitches with the needle you just emptied, repeat. After a few rounds, the rhythm feels natural, and the main thing to watch is the joins between needles.

Preventing Ladders

Ladders are loose, vertical columns of stitches at the joins between needles, caused by the yarn stretching across the gap between needles. Three fixes, in order of effectiveness:

  1. Pull the first stitch on each new needle a little tighter. Not hard — just snug. This closes the gap before it becomes a ladder.
  2. Rotate the needle positions every few rounds. Move one or two stitches from the end of one needle to the start of the next, so the joins do not stack in the same place every round.
  3. Use a fifth needle (or a tighter grip). Five-needle sets distribute the joins more evenly, and holding the needles closer together reduces the gap the yarn must cross.

Ladders relax noticeably after blocking, so mild laddering on a first DPN project is not a failure — it is a normal beginner result that improves with practice.

Casting On, Joining in the Round, and Ladder Prevention — Together

These three topics are the complete beginner DPN skill set: cast on and divide, join without twisting, and manage the joins. A knitter who can do these three things can knit any small-circumference project on DPNs. Everything beyond them — heel turns, thumb gussets, crown shaping — is pattern-specific and belongs on the pattern's own page, not here.

DPNs vs Circular Needles: When to Use Which

Situation Use DPNs Use circular needles
Circumference under ~16 inches Yes — the standard tool Only with magic loop (long cable, loops pulled out)
Circumference over ~16 inches No — stitches stretch and fall off Yes — the standard tool
Hat crown decreasing Yes — as the crown shrinks Switch from circular to DPNs when the round gets small
Beginner learning in the round Either, but DPNs teach needle management directly Often easier to start with, fewer needles to juggle
Travel knitting Compact and light Compact, but the cable can tangle

Many knitters start in-the-round projects on a circular needle and switch to DPNs when decreasing makes the round too small for the cable. That switch is normal and expected — patterns often say "change to DPNs when necessary," and this page is the reference for that moment.

Frequently Asked Questions

What are double pointed knitting needles?

Short needles pointed at both ends, sold in sets of four or five, used for knitting small tubes in the round — sock cuffs, hat crowns, sleeve cuffs — where a circular needle would be too long.

How do you knit with double pointed needles?

Cast on onto one needle, divide the stitches evenly across three or four needles, arrange them in a triangle or square without twisting, mark the round start, and work around with the empty needle, one needle at a time.

How do you prevent ladders when knitting with DPNs?

Pull the first stitch on each new needle a little tighter, rotate needle positions every few rounds so joins do not stack, and use a five-needle set if ladders persist. Mild laddering relaxes after blocking.

What is the difference between DPNs and circular needles?

DPNs are several short needles used for small circumferences; circular needles are two tips joined by a cable, used for larger circumferences. Knitters often switch from circular to DPNs when a decreasing crown gets too small for the cable.

Do I need double pointed needles as a beginner?

Not for your first projects — a scarf needs straight needles, and a hat body can be knitted on a circular needle. You need DPNs when you decrease a hat crown or knit socks, which usually comes after the first few projects.

Next step: continue with Knitting for Beginners — Start Here →