Every guide is free — start with the Start Here guide →
Plain-Language Knitting GuidesKnitBeginnersStart Learning

How to Knit: The Complete Starter Guide

By the KnitBeginners team · Published 5 November 2026 · Updated 19 November 2026

How to knit, in one paragraph: cast loops onto a needle, pull new loops of yarn through those loops to form rows of knit and purl stitches, and cast off the last row so the fabric cannot unravel. That is the entire craft. The rest of this guide breaks that paragraph into steps you can follow with yarn in your hands, in the order you will actually use them.

This guide is built around long-tail skills rather than the head term alone, because that is where beginners actually get stuck: casting on neatly, keeping tension even, telling knit from purl, and finishing without a tight edge. Each step links to a deeper guide for that single skill.

Close-up of hands forming the first knit stitches with chunky cream yarn.
HOW TO KNIT, IN SIX STEPSCast onPut the first row of loops on the needle.Knit stitchPull new loops through, row after row.Purl stitchThe reverse of knit — a bump faces you.Cast offFinish the last row so it cannot unravel.Read a patternMaterials and gauge first, then row by row.Make a projectA garter-stitch scarf first, then a hat.
Infographic: how to knit in six steps — cast on, knit, purl, cast off, read a pattern, then make a project.

Before You Start: Yarn, Needles, and Setup

Choose smooth, medium-weight yarn in a light color and needles to match — US size 8 (5 mm) is a comfortable starting point for most medium-weight yarn. Light colors help you see each stitch, and smooth yarn helps you spot mistakes. Wind off a comfortable length of yarn, hold the ball where it can feed freely (on the floor beside you or in a bag), and sit somewhere with good light.

Hold your needles the way that feels natural. There are two common holding styles — English style, where you hold the working yarn in your right hand, and Continental style, where you hold it in your left. Neither is better for a beginner. Pick the one that feels less awkward, and know that you can switch later; many knitters try both before settling. What matters at the start is not speed but even, relaxed movements.

Step 1: How to Cast On Knitting

Casting on creates the first row of loops on your needle. Every project starts here, and a good cast-on is stretchy enough that the edge does not pull tight.

The most common beginner method is the long-tail cast-on. It makes a neat, elastic edge and, once learned, becomes fast and automatic. The basic idea: you make a slip knot, then use your thumb and finger to form loops over the needle, alternating the yarn path so each new loop sits neatly beside the last.

Do not worry if your first cast-on row looks uneven. Tension evens out with practice, and the cast-on edge is the least visible part of most projects. If the edge feels very tight, try casting on with a needle one size larger than you plan to knit with, then switch back to your working needle for the first row.

Full method walkthrough, including three other cast-on methods and a comparison table for choosing between them: How to Cast On Knitting.

Step 2: The Knit Stitch

The knit stitch is the stitch you will use most. Worked row after row, it creates garter stitch — a bumpy, stretchy fabric that looks the same on both sides. Worked alternating with purl rows, it creates stockinette stitch — smooth on the front, bumpy on the back.

To knit a stitch: insert the right needle into the front of the first loop on the left needle, from left to right. Wrap the working yarn around the right needle, pull that new loop back through the old loop, and slide the old loop off the left needle. Repeat across the row. The first few stitches will feel slow and clumsy; by the end of the first row, the motion usually starts to feel familiar.

Two things to watch as you practice:

Full step-by-step for this stitch alone, including what it looks like and the most common beginner errors: Knit Stitch for Beginners.

Step 3: How to Purl in Knitting (and How to Knit and Purl Together)

The purl stitch is the reverse of the knit stitch. Where a knit stitch pulls the yarn through from back to front, a purl stitch pulls it through from front to back, making a bump on the side facing you.

To purl a stitch: bring the working yarn to the front of the work, insert the right needle into the first loop from right to left, wrap the yarn around the needle, pull the new loop through, and slide the old loop off. It feels strange the first few times because the yarn is in front instead of behind, but the motion is the same shape as knitting.

Knitting and purling together is where patterns begin. Alternating whole rows — one knit row, one purl row — makes stockinette stitch. Alternating stitches within a row — knit one, purl one, repeated — makes ribbing, the stretchy fabric used for cuffs and hats. Our comparison page explains what each stitch looks like and when to use which: Knit vs Purl Explained. The full purl tutorial is here: Purl Stitch for Beginners.

Step 4: How to Cast Off Knitting (Bind Off)

Casting off, also called binding off, finishes your work. Without it, the last row of live loops would unravel the moment it slipped off the needle.

The basic cast-off: knit two stitches, then lift the first stitch over the second stitch and off the needle. Knit one more stitch, lift the previous stitch over it, and repeat across the row. At the end, cut the yarn, pull the tail through the last loop, and tighten gently.

The most common beginner mistake is casting off too tightly, which makes the edge pucker and refuse to stretch. Keep your tension loose on this row, and if the edge still feels tight, cast off with a needle one size larger. A stretchy cast-off matters most on edges that need to stretch — scarf ends less so, hat brims and necklines very much so.

Full guide, including the stretchy/loose method and casting off in the round: How to Cast Off Knitting.

Step 5: How to Read a Knitting Pattern

Once you can cast on, knit, purl, and cast off, you can follow a pattern. A pattern is simply those same steps written down in shorthand, row by row.

A typical pattern starts with the materials (yarn weight and needle size), the gauge, and the size. Then it gives the instructions, often with abbreviations: "k" for knit, "p" for purl, "yo" for yarn over, "k2tog" for knit two together. Repeats are shown with asterisks or brackets — for example, "*k2, p2; repeat from * to end" means repeat knit two, purl two across the whole row.

Charts are the same instructions drawn as a grid, where each symbol stands for a stitch. Charts are read from bottom to top, and right-side rows are read right to left. They look intimidating but are often easier than written instructions once you know the symbols, because you can see the pattern forming.

Worked example, abbreviation table, and chart-reading walkthrough: How to Read a Knitting Pattern and Chart.

Step 6: Basic Knitting Stitches to Learn Next

After knit and purl, the next stitches build directly on them:

Every stitch has its own dedicated tutorial in the stitches section, organized so you learn each one only when you need it: Knitting Stitches for Beginners.

Your First Project After This Guide

The best first project is a scarf in garter stitch: cast on, knit every row, cast off. It practices exactly the skills in this guide, and it forgives uneven tension because garter stitch hides it well. When you finish it, a hat is the natural second project — it adds knitting in the round and simple decreasing.

Frequently Asked Questions

How do I cast on knitting?

Use the long-tail cast-on: make a slip knot, then form loops on the needle using your thumb and finger until you have the number of stitches your pattern calls for. The full method, plus three alternatives and a comparison table, is here: How to Cast On Knitting.

How do I cast off / bind off knitting?

Knit two stitches, lift the first over the second and off the needle, then knit one more and repeat across the row. Cast off loosely so the edge stays stretchy. Full guide: How to Cast Off Knitting.

What is the difference between knit and purl stitch?

A knit stitch pulls yarn through from back to front and looks like a smooth V on the side facing you. A purl stitch pulls yarn through from front to back and looks like a bump. They are the same stitch worked from opposite sides, and together they make almost every knitted fabric.

How do I purl in knitting?

Bring the yarn to the front, insert the right needle into the first loop from right to left, wrap the yarn around the needle, pull the new loop through, and slide the old loop off. Full tutorial: Purl Stitch for Beginners.

How do I read a knitting pattern?

Read the materials and gauge first, then follow the row-by-row instructions using the abbreviation list. Repeats are marked with asterisks or brackets. Charts are read bottom to top, right-side rows right to left. Worked example here: How to Read a Knitting Pattern and Chart.

Next step: continue with Knitting for Beginners — Start Here →